What Is Malolactic Fermentation in Wine? Understand Acidity and Flavor
Posts by Claire DonovanNovember 19, 20260 Comments
11 min read · by Claire Donovan · Updated
We may earn a commission when you buy through links on this page, at no extra cost to you. Learn more.
Understanding what is malolactic fermentation in wine starts with a simple answer: lactic acid bacteria convert malic acid into lactic acid and carbon dioxide, softening the wine’s sharp acidity and often changing its texture and aroma. The process is common in red wines and is also used for some white wines, especially Chardonnay. It is a separate bacterial step from the yeast-driven fermentation that produces alcohol, and winemakers can encourage it, manage it, or prevent it to shape a wine’s style.
Malolactic fermentation is often shortened to MLF, and you may also see it called malolactic conversion. The name can sound technical, but its effects are easy to understand: the wine’s acid profile changes, its mouthfeel may become rounder, and certain aromas can become more noticeable. Knowing what the process does helps explain why two Chardonnays can taste very different even when they come from the same grape. It also gives context for terms in a Wine Glossary.
What Changes Chemically During Malolactic Fermentation?
Malolactic fermentation changes one grape acid into another. Lactic acid bacteria convert malic acid, the sharper acid associated with green apple, into lactic acid, which generally gives a softer impression; the reaction also releases carbon dioxide. UC Davis describes this as a conversion of a dicarboxylic acid into a monocarboxylic acid, rather than a conventional yeast fermentation. The distinction explains why MLF is not the same process as alcoholic fermentation, even though winemakers commonly call it a second fermentation.

Malic acid has two acidic groups, while lactic acid has one. As bacteria carry out the conversion, the wine’s concentration of malic acid falls, its titratable acidity usually decreases, and its pH generally rises. The precise sensory change depends on the wine’s starting composition: a high-acid wine from a cool growing season may feel noticeably less angular after MLF, while a wine that began with moderate acidity may show a subtler shift. The result is not that the wine becomes sweet; the acid balance changes while the wine can remain fully dry.
The carbon dioxide is a by-product of the bacterial reaction, not evidence that the wine has become a sparkling style. In a properly managed cellar, MLF is normally completed before bottling. If the bacteria keep working after bottling, however, the wine can develop haze, sediment, and unwanted spritz. UC Davis notes that bacterial growth in the bottle can make wine cloudy and effervescent, which is one reason cellar teams monitor completion rather than treating MLF as an automatic event.
Which Bacteria Drive the Conversion, and When?
Malolactic fermentation is carried out by lactic acid bacteria, with Oenococcus oeni the species most commonly selected for commercial winemaking. Other bacteria, including members of the Lactobacillus and Pediococcus groups, can also convert malic acid, although not every strain performs reliably in wine. The wine environment is demanding: alcohol, low pH, limited nutrients, and sulfur dioxide can all restrict bacterial growth, so choosing a suitable strain matters.
MLF often follows alcoholic fermentation, once yeast has converted grape sugar into alcohol, but it can also begin while alcoholic fermentation is still underway. Some wineries rely on bacteria already present on grapes or winery equipment; others add a selected starter culture to make the timing and strain more predictable. Inoculation does not change the basic chemistry. It gives the winemaker more control over which bacteria are active and reduces reliance on an uncertain spontaneous start.
Temperature is one practical control. Oregon State University Extension lists 64–71°F (18–22°C) as a recommended range for conducting MLF, while cooler conditions can slow bacterial activity. Alcohol level and pH matter just as much: the same guide identifies pH 3.20–3.50 and alcohol below 13.5% as useful production targets for the conditions it describes. These are cellar-management references, not guarantees; individual strains and wine lots can behave differently, particularly when several stressful conditions occur together.
How MLF Changes Acidity, Texture, and Aroma
MLF can shift a wine’s acidity, texture, and aroma, with diacetyl and Chardonnay often used to explain its most recognizable sensory effects. The same conversion can be barely noticeable in one wine and more apparent in another.

The most dependable sensory effect is a change in acidity. Malic acid tends to feel sharper, while lactic acid is generally perceived as softer, so a wine that completes MLF can seem less tart and more rounded. This does not mean every wine becomes low-acid or heavy. The grape variety, climate, harvest ripeness, and initial acid balance still shape the finished wine, and a winemaker may choose MLF precisely because a particular lot has more sharpness than the intended style requires.
MLF can also affect aroma through compounds produced by bacterial metabolism. The best-known is diacetyl, which can smell or taste like butter, cream, or buttered popcorn. In some Chardonnay, a restrained buttery note adds richness and complements a creamy texture; at higher levels it can dominate the fruit. The presence of MLF does not automatically mean a wine will smell strongly of butter, because diacetyl production and its later reduction or retention depend on the bacterial strain, cellar conditions, and handling after the conversion. Texture can shift even when the aroma stays subtle. A Chardonnay may seem broader or creamier, while a red wine may feel less angular because its acid profile has changed. MLF is not the same as oak aging: vanilla, toast, and smoke are associated with barrel influence, whereas the buttery character often linked to MLF comes from diacetyl. A wine can undergo MLF in stainless steel, in barrel, or in another vessel, and vessel choice adds its own effects separate from the bacterial conversion.
Which Wine Styles Usually Undergo MLF?
Most red wines undergo malolactic fermentation because the conversion can soften naturally sharp malic acidity and help make the wine more stable before bottling. This includes many familiar styles made from Cabernet Sauvignon, Merlot, Pinot Noir, and Syrah. The grape variety does not dictate every cellar decision, though: a winemaker still considers the wine’s pH, acid level, intended freshness, and microbial condition before deciding whether to encourage MLF.
Tip: When comparing two Chardonnays, look for the producer’s technical notes on MLF as well as oak aging; buttery aroma alone cannot identify which cellar choices were used.
White wine is more style-dependent. Chardonnay is the best-known example because MLF can add a rounder texture and, in some cases, a buttery aroma. Other white wines may undergo full, partial, or no MLF according to the style the producer wants. A crisp Sauvignon Blanc or Riesling often aims to retain vivid acidity and fresh fruit, so a winemaker may block or limit the conversion; another producer may choose a controlled amount if the base wine is especially sharp.
Some sparkling wines undergo MLF in the still base wine before the second fermentation that creates the bubbles. That choice can soften the base wine’s acidity and alter its aroma, but it is not a requirement for every sparkling style. Chardonnay-based sparkling wines may be made with or without MLF, depending on the producer’s target for freshness, texture, and aging. The distinction is useful when comparing traditional-method wines, where the second fermentation takes place in the bottle, with Prosecco, which is typically made by the tank method.
How Winemakers Manage Timing and Completion
Winemakers decide whether MLF should occur, when it should begin, and how to confirm that it has finished. A spontaneous conversion may suit a winery that values a less interventionist approach, but it can start slowly or involve unwanted bacteria. A selected starter culture can provide more predictable progress, especially when the wine has low pH, higher alcohol, or other conditions that make bacterial activity difficult. The key is to manage the wine as a complete system rather than focusing on temperature alone.
Oregon State University Extension gives the following practical reference points for successful MLF. Its guidance includes a target temperature of 64–71°F, a pH range of 3.20–3.50, and free sulfur dioxide below 5 mg/L during the conversion. The Australian Wine Research Institute also shows how sensitive white and sparkling base wines can be: its reference categories rate 18–22°C as favorable, while temperatures below 12°C are harsh for MLF. The applicable range depends on the wine and the bacterial culture, so these figures are guides rather than universal rules.
| Parameter | Winemaking reference | Why it matters |
|---|---|---|
| Temperature during MLF | 64–71°F (18–22°C) | Supports bacterial activity in the OSU Extension guidance |
| Wine pH | 3.20–3.50 | Describes a workable range in the OSU guidance |
| Alcohol | Below 13.5% | Higher alcohol can make the bacterial conversion more difficult |
| Free sulfur dioxide | Below 5 mg/L | MLF bacteria are sensitive to sulfur dioxide |
| Residual malic acid at completion | Below 30–50 mg/L | OSU recommends confirming completion with an enzymatic assay or outside laboratory |
Monitoring is as important as the initial decision. Cellar staff can track malic acid during the conversion and look for signs that the process has slowed or stopped. Oregon State University Extension recommends regular checks and notes that paper chromatography, enzymatic analysis, or laboratory testing can be used to follow progress. A sluggish MLF can leave residual malic acid and prolong the period in which other microorganisms may become active, so a producer needs to know whether the conversion is continuing, complete, or stuck. After completion, a winery can stabilize the wine and prepare it for maturation or bottling. Sulfur dioxide is often part of that protection plan, but its appropriate use depends on the wine’s pH and other cellar measurements. The main consumer takeaway is straightforward: MLF is not simply left to happen in a bottle. Producers monitor it in the cellar so the wine reaches the intended style without an unwanted bacterial change after packaging. For a deeper technical explanation of the management steps, see Oregon State University’s guidance on conducting MLF.
How to Read MLF Clues in a Finished Bottle
A wine’s flavor can offer clues, but it cannot prove by itself whether MLF occurred. Softer acidity, a rounder impression, and buttery or creamy notes may suggest the conversion, especially in Chardonnay, yet none is a guaranteed marker. Some wines complete MLF with very little obvious diacetyl, and other wines can seem creamy because of lees contact, oak, or winemaking choices unrelated to MLF. Treat sensory clues as context, not a laboratory result.
The producer’s technical sheet is often the clearest place to look. It may state that the wine underwent full or partial malolactic fermentation, that MLF was blocked, or that the wine was aged on its lees after fermentation. These phrases describe different choices: lees aging refers to contact with spent yeast cells, while MLF refers specifically to bacterial conversion of malic acid. The two methods can be used together, but one does not automatically mean the other took place.
When comparing bottles, look at the complete style rather than treating MLF as a quality score. A fresh, high-acid white can be an excellent choice when crispness is the goal; a wine with MLF may be a better fit when a softer texture suits the meal. If you are planning pours for a group, bottle format is a separate calculation from fermentation style; our explainer on how many glasses in a magnum covers the serving difference. A producer’s explanation and the overall balance in the glass are more useful than assuming that more MLF always means better wine. For a concise scientific overview, the UC Davis explanation of malolactic conversion outlines the acid chemistry and why a cellar wants the process to finish before bottling. That background helps separate the bacterial process from other common sources of buttery, creamy, or rounded character in wine.
Frequently Asked Questions
These answers clarify five common points about Chardonnay, residual bacteria, and the chemical conversion from malic acid to lactic acid. They also distinguish the cellar choices that shape freshness from those that shape texture.
Does malolactic fermentation create alcohol?
No. The central reaction is a decarboxylation, not the yeast conversion of sugar into ethanol. In simplified chemical terms, one molecule of malic acid yields one molecule of lactic acid and one molecule of carbon dioxide.
Can malolactic fermentation happen after a wine is bottled?
Yes, residual bacteria and malic acid can allow the conversion to restart in the bottle if the wine was not adequately stabilized. The resulting bacterial activity may create visible deposits and a slight, unintended fizz, even in a wine sold as still.
Can a winemaker put only part of a Chardonnay lot through MLF?
Yes. A producer can ferment or mature separate portions differently and blend them later, combining the roundness of an MLF-treated portion with the sharper fruit profile of an untreated portion. This approach gives the cellar more control than making one all-or-nothing decision for the whole lot.
Can a stuck malolactic fermentation be restarted?
Sometimes, but the cellar team first needs to assess conditions such as pH, alcohol, temperature, nutrients, and signs of spoilage bacteria. Oregon State University Extension describes using a suitable starter strain and re-inoculation in certain difficult lots after the cause of the delay has been evaluated.
Are malolactic bacteria permitted in commercial winemaking?
Yes. The International Organisation of Vine and Wine recognizes their use, and FIVS describes malolactic bacteria as permitted for grape wine in multiple countries. The strains used must still comply with the applicable local rules and conditions for oenological cultures.
Malolactic fermentation is a controlled bacterial conversion that can soften acidity, shift texture, and add aroma complexity, but it is not required for every wine style. Once you know whether a producer has encouraged, limited, or prevented MLF, the choices behind a wine’s freshness and richness become easier to understand. The best version is the one that supports the balance the winemaker intended.
More in Wine Basics
Which Rose Is Best for Your Taste, Budget, and Food PairingsUpdated Nov 21, 2026
Is Cheap Wine Bad? How to Find Bottles Worth DrinkingUpdated Nov 21, 2026
What To Write On A Wine Gift Tag: Thoughtful Messages For Every OccasionUpdated Nov 21, 2026
Which Wine Is Best For Weight Loss? Compare Lower-Calorie ChoicesUpdated Nov 21, 2026
What Is The Best Wine For Mimosas? Choose Bubbly That Balances Orange JuiceUpdated Nov 20, 2026
Which Prosecco Is Best for Your Taste and OccasionUpdated Nov 20, 2026