How to Open Wine With a Screw Without a Corkscrew
Posts by Claire DonovanNovember 20, 20260 Comments
15 min read · by Claire Donovan · Updated
We may earn a commission when you buy through links on this page, at no extra cost to you. Learn more.
How to open wine with a screw is simple: insert a long household screw into the center of the cork, then use pliers or a hammer’s claw to pull the cork out slowly. This improvised method can work when a traditional corkscrew is unavailable. You need a sturdy screw, a screwdriver, and a stable surface, along with patience to avoid breaking the cork or damaging the bottle. Work carefully and stop if the cork starts falling apart.
Finding a bottle of wine without a corkscrew does not necessarily mean postponing your plans. A few ordinary household tools can provide enough grip and leverage to remove a cork, although the process requires more attention than using a proper wine opener. The screw method is one of the more practical emergency options because it uses the same basic principle as a conventional corkscrew: establish a secure grip inside the cork and lift it through the bottle neck. Here is how to choose the right tools, perform the extraction, and handle problems without turning a simple bottle opening into a bigger mess.
Why the Screw and Hammer Method Works
A screw can grip the cork firmly enough to provide an improvised extraction point. When combined with a hammer or pliers, it creates leverage that helps lift the cork through the narrow neck of a standard wine bottle.

A traditional corkscrew uses a spiraled metal component called a helix. You twist this component into the cork, then use a lever or handle to pull the cork upward. A household screw follows a similar principle, although it is not specifically designed for wine bottles. Its threads grip the cork while the exposed head gives you something to hold or pull.
The method is particularly useful when you have a small toolbox nearby. A wood screw with a reasonably coarse thread generally provides a better grip than a short, smooth screw. A screwdriver helps you control the insertion, while pliers or a claw hammer supplies the pulling force. You do not need an electric drill, and using one introduces additional opportunities to drive the screw too deeply or damage the bottle.
There are limitations. A cork that is extremely dry, brittle, or already damaged may split rather than come out in one piece. A synthetic cork may offer more resistance during extraction, although a firm synthetic closure can also provide a stable grip. The condition of the cork matters as much as the tools.
According to the guidance in Martha Stewart’s explanation of the screw method, a household screw can be inserted into the cork and extracted using the claw side of a hammer. Certified sommelier Pamela Vachon describes leaving approximately one-quarter inch of screw exposed before beginning the pull.
Think of this as an emergency technique rather than a replacement for a proper wine key. If you have a valuable older bottle, a fragile cork, or a bottle that has already suffered damage, waiting until you can use an appropriate wine opener is the better choice.
Tools and Screw Measurements to Prepare
The basic setup requires three items: a long screw, a screwdriver that fits its head, and either sturdy pliers or a claw hammer. Preparing the equipment before touching the cork makes the process easier to control.
A wood screw approximately 2 inches long is a practical choice for this technique. Its length provides enough thread to engage the cork while leaving room to grip the head. Choose a screw with a head that will not slip easily from the jaws of your pliers or the claw of your hammer.
The screwdriver should fit the screw head properly. A Phillips-head screw requires a Phillips screwdriver, while a slotted screw needs a flat-head screwdriver. A poorly fitting tool can slip sideways, damage the cork, or cause an injury. Check that the screwdriver is long enough to turn comfortably without pressing against the bottle rim.
Use one of the following extraction tools:
- Claw hammer: The curved claw can catch beneath the exposed screw head and provide leverage.
- Pliers: A sturdy pair can grip the screw head and help pull the cork vertically.
- Combination pliers: These may provide a useful grip when ordinary flat pliers cannot hold the screw securely.
- Kitchen towel: A folded towel can help stabilize the bottle and protect the work surface, although it should never be used as a substitute for a secure grip on the tools.
The following measurements provide a useful starting point. They are practical working dimensions rather than universal specifications because cork size, bottle construction, and screw design can vary.
| Item or measurement | Recommended amount | Purpose |
|---|---|---|
| Wood screw length | About 2 inches | Provides sufficient insertion depth and grip |
| Exposed screw length | About 1/4 to 3/4 inch | Leaves room for extraction tools |
| Insertion position | Near the cork center | Helps distribute pulling force |
| Extraction direction | Straight upward | Reduces sideways stress on the cork |
| Required basic tools | 3 items | Screw, screwdriver, and extraction tool |
One important detail is the amount of exposed screw. Martha Stewart’s cited sommelier recommendation uses approximately one-quarter inch, while Wine Enthusiast describes leaving less than one inch exposed. These measurements are not contradictory: the ideal amount depends on the screw head and the extraction tool. Leave enough room for a secure grip without sacrificing too much thread engagement inside the cork.
Tip: Before inserting the screw, place the bottle on a level countertop and test that your pliers or hammer can grip the screw head comfortably. A secure tool connection is more useful than having an unusually long section of screw exposed.
How to Open Wine With a Screw Step by Step
The best approach is to remove the foil, position the screw, insert it carefully, and extract the cork using steady upward pressure. Keep the bottle upright and avoid sudden movements throughout the process.

Step 1: Remove the foil capsule
Start by removing the foil or plastic covering the top of the bottle. Peel it away below the bottle lip so the entire cork is visible. This gives you enough room to position the screwdriver and see exactly where the screw enters.
Watch for sharp foil edges while removing the covering. Once the cork is exposed, check whether the bottle actually has a traditional cork. Some wine bottles use screw caps, which can be opened by twisting the cap rather than attempting an extraction.
Step 2: Position the screw
Place the bottle upright on a stable countertop or another flat surface. Identify the center of the cork and position the screw point there. Keeping the screw close to the center helps prevent uneven pressure that could split the cork.
Hold the screwdriver vertically and begin turning the screw into the cork. Apply consistent pressure without forcing it. The goal is to let the threads grip the cork rather than tear through it.
Step 3: Insert the screw carefully
Continue turning until most of the screw is embedded. Leave approximately one-quarter to three-quarters of an inch exposed, adjusting the amount to suit your extraction tool. Do not drive the screw all the way through the cork. If the screw penetrates the bottom, it may introduce cork particles into the wine and make extraction more difficult.
Keep the screwdriver aligned with the bottle opening. If the screw begins moving toward the glass, stop immediately and reposition it. Never use the bottle neck as a guide or support for the screwdriver.
Step 4: Secure the extraction tool
With pliers, grip the exposed screw head firmly. Make sure the jaws are not resting against the glass. Pull upward slowly while keeping the bottle steady.
If you have a claw hammer, position the claw beneath the screw head. The claw should engage securely without touching or pressing heavily against the bottle rim. A hammer provides additional leverage, but careless positioning can damage the glass.
Step 5: Pull the cork out gradually
Apply steady upward pressure. The cork should begin moving toward the opening as the screw transfers your pulling force into the cork material. Avoid jerking the hammer or twisting the bottle sharply.
As the cork rises, reduce the force and maintain control. Once enough of the cork emerges to grasp it safely, finish removing it with your fingers. Keep your hand away from the screw point and any sharp tool edges.
Step 6: Inspect the bottle opening
After removing the cork, examine the bottle opening for visible chips or damage. Look at the cork as well. If it has come out intact, remove the screw carefully and set the cork aside.
If the cork has broken into pieces, avoid pouring immediately until you have checked the wine for loose fragments. For more complicated situations, the instructions in our article on how to open a wine bottle with a broken cork explain other approaches to handling a damaged closure.
Choosing Between Pliers and a Claw Hammer
Both tools can extract a cork, but they provide different types of leverage. Pliers offer direct control over the screw, while a claw hammer provides a longer lever that can make pulling easier.
Pliers are often the more straightforward choice if the screw head is large enough to grip securely. You can hold the screw between the jaws and pull upward while keeping the tool aligned with the cork. This approach avoids placing a hammer against the bottle opening, reducing the chance of accidental contact with the rim.
A claw hammer is useful when the screw head is difficult to grip with pliers. The curved claw catches beneath the head and acts as a lever. However, this arrangement requires careful positioning. If the hammer is supported against the bottle lip, the concentrated force can chip the glass.
For that reason, do not use the bottle rim as a fulcrum. Keep the extraction tool clear of the glass and use controlled pulling force. If the hammer cannot provide leverage without pressing against the bottle, switch to pliers or stop the attempt.
Consider these practical differences:
- Choose pliers when you want direct control and have a screw head that fits securely between the jaws.
- Choose a claw hammer when its claw can grip the screw without making contact with the bottle.
- Choose neither if the cork is crumbling, the screw is loose, or the glass appears damaged.
For an especially stubborn cork, patience is more useful than extra force. Pull in short, controlled movements and check that the screw remains firmly embedded. If it starts coming out independently of the cork, stop and reassess rather than continuing to pull harder.
How Cork Material Changes the Extraction
Natural cork and synthetic cork can behave differently during improvised extraction. A firm cork usually provides a better gripping surface, while an older natural cork may crumble under the pressure of a screw.
Natural cork is made from the bark of cork oak trees. Its cellular structure gives it flexibility and compressibility, which helps it seal a wine bottle. However, natural cork can gradually dry out or deteriorate, especially when storage conditions have been poor.
A deteriorating cork may split around the screw threads. If this happens, continuing to pull can leave part of the cork inside the neck. It may be possible to reposition the screw into a stronger section, but repeated attempts can produce more fragments.
Synthetic corks are made from manufactured materials rather than natural cork bark. Their firmness can make screw extraction more predictable in some situations, although the material may resist pulling differently from natural cork. A screw that grips well in one closure may not behave the same way in another.
Older bottles require extra care
Vintage wine deserves particular attention because the cork may have become fragile during years of storage. A screw can penetrate a deteriorated cork without providing enough strength to lift it. This is one reason professional wine service often uses specialized two-pronged openers for older bottles with delicate corks.
If you are dealing with a valuable bottle, do not experiment with multiple screws or excessive leverage. A broken cork can be frustrating, but a damaged bottle is a much bigger problem. Waiting for an appropriate opener is usually the better decision.
Also consider the wine’s storage history. Bottles stored upright for extended periods may have corks that are more prone to drying, although age and storage conditions do not guarantee that a cork will fail. Examine the exposed surface before choosing the extraction method.
What to Do When the Cork Breaks or the Screw Slips
A broken cork does not automatically mean the wine is lost. You can sometimes extract the remaining cork material, or use a different opening method if the original screw no longer holds securely.
If the screw slips out while the cork remains in the bottle, stop pulling. Inspect the hole and determine whether the cork is still firm enough to accept another screw. Wine Enthusiast notes that a broken cork can sometimes be addressed by starting again with the remaining cork stump.
However, do not simply insert a new screw into the same damaged hole. The threads may have removed too much material to provide a reliable grip. A slightly different insertion position may work if the remaining cork is firm, but avoid forcing the screw against the bottle neck.
When the cork breaks into two pieces
If the upper portion comes away but a substantial piece remains, the remaining cork may still be removable. Carefully position another screw into the intact material and attempt a controlled extraction. Stop if the cork begins disintegrating or the screw repeatedly loses its grip.
Another possibility is to push the remaining cork into the bottle. This method uses a blunt object, such as the handle of a wooden spoon, to move the cork below the neck. It is less dependent on having extraction tools, but it means the cork will float in the wine.
Set the bottle on a stable surface and use a blunt handle narrower than the opening. Press steadily rather than striking the cork with a sharp object. Perform this over a sink because the movement can cause wine to splash upward.
Once the cork is inside, pour slowly through a fine-mesh strainer or coffee filter to catch loose pieces. Our instructions for how to open a wine bottle with a fork cover another improvised technique, although a proper opener remains preferable to household utensils.
When the bottle itself is damaged
A chipped or cracked bottle requires a different response. Do not continue extracting the cork or attempt to pour wine through an opening with suspected glass damage. Small glass fragments can be difficult to see, and a strainer cannot reliably make potentially contaminated wine safe.
Keep your hands away from the damaged area and avoid handling broken glass directly. If the bottle has cracked or shattered, do not drink its contents. Preventing injury is more important than saving the bottle.
Safety Mistakes and Better Alternatives
The screw method is a practical emergency solution, but some popular bottle-opening tricks introduce unnecessary risks. Avoid heating glass, using pointed knives, or striking a bottle against a wall to force out the cork.
One frequently shared technique involves heating the bottle neck with a lighter. The idea is to warm the air beneath the cork until pressure pushes the cork outward. However, uneven heating can stress the glass, especially when the bottle is cold. The result may be broken glass rather than an open bottle.
Using a serrated knife is another poor choice. A knife can slip while being twisted into the cork, potentially causing serious hand injuries. It also provides less predictable control than a screw with a proper screwdriver and extraction tool.
The shoe method is similarly unpredictable. It involves placing the bottle base inside a shoe and tapping the shoe against a solid surface. Although some people report success, repeated impacts can damage the bottle. A bottle that breaks during the process can leave dangerous glass fragments in the surrounding area.
Epicurious discusses several emergency alternatives in its guide to opening wine without a corkscrew, including the screw technique and pushing a cork into the bottle. Its warnings about heating the bottle and using a knife are particularly important.
Know when to use a proper wine opener
A conventional corkscrew is still the most controlled option for a bottle with an intact cork. A waiter’s friend is compact, provides a dedicated spiral, and uses a hinged lever to extract the cork without requiring improvised hardware.
If you regularly open wine, keeping a corkscrew in a kitchen drawer, picnic bag, or travel kit can prevent this situation. A spare opener is particularly useful for gatherings where several bottles may need to be opened.
Another alternative is choosing wines with screw-cap closures. These bottles are designed to open without a corkscrew, and screw caps are used for a wide range of wines, including quality wines from established producers. The closure itself does not determine whether a wine is good or poor.
For more practical information about closures, bottle handling, and everyday wine questions, explore our Wine Q&A and wine basics section. Understanding the differences between closures makes it easier to choose the right opening technique before you start.
Frequently Asked Questions
Can you open a wine bottle with a drywall screw?
A drywall screw can sometimes grip a cork, but its design and thread profile may not provide the same extraction performance as a suitable wood screw. Its sharp point and thread pattern also require careful handling. A sturdy wood screw is generally the more practical household choice.
Can a screw be used to open a bottle with a plastic cork?
Yes, a household screw can sometimes grip a plastic or synthetic cork. However, synthetic closures can have different levels of firmness and elasticity depending on their construction. If the screw does not hold securely, do not compensate by pulling harder.
Does the screw method work on a champagne bottle?
No. Do not use a screw, hammer, or improvised cork extraction method on a bottle of Champagne or other sparkling wine. These bottles contain pressurized carbon dioxide, so their closures require a different opening technique. Keep the bottle pointed away from people and control the cork while slowly turning the bottle.
Can a wine cork be reused after removing the screw?
A cork with a screw hole may still fit loosely into the bottle, but it is not an ideal reusable closure. The hole can compromise the seal and allow additional air to enter. For short-term storage, use a suitable wine stopper instead.
Why does a screw sometimes come out without the cork?
This usually happens because the screw has not established a strong enough grip inside the cork. It can also occur when the cork is unusually soft, deteriorated, or already damaged. A screw with a more suitable thread may improve grip, but a fragile cork may require a specialized two-pronged wine opener.
Opening wine with a screw is a useful emergency technique when you have a screwdriver, a suitable screw, and pliers or a claw hammer available. The most important steps are keeping the screw securely embedded, stabilizing the bottle, and applying slow, controlled upward pressure. If the cork or glass becomes damaged, stop and choose a safer alternative rather than forcing the bottle open.
More in Wine Basics
Which Rose Is Best for Your Taste, Budget, and Food PairingsUpdated Nov 21, 2026
Is Cheap Wine Bad? How to Find Bottles Worth DrinkingUpdated Nov 21, 2026
What To Write On A Wine Gift Tag: Thoughtful Messages For Every OccasionUpdated Nov 21, 2026
Which Wine Is Best For Weight Loss? Compare Lower-Calorie ChoicesUpdated Nov 21, 2026
What Is The Best Wine For Mimosas? Choose Bubbly That Balances Orange JuiceUpdated Nov 20, 2026
Which Prosecco Is Best for Your Taste and OccasionUpdated Nov 20, 2026